A SIMPLE LOW POWER IVERTER USING CD4047 IC

This simple low power dc to ac inverter (dc to ac converter) circuit converts 12V DC to 230V or 110V AC. By doing simple modification you can also convert 6V DC to 230V AC or 110V AC. It can be used as inverters for home needs to enable light loads (electric bulb, CFL, etc) at the time of electricity failure. 
You can construct this circuit of simple inverter at a cheap rate with locally available components. Use a 12V rechargeable battery and battery charging circuit for this dc to ac inverter. We have already posted the circuit for battery charger.


Simple DIY Inverter 

Components required for DC to AC Inverter
  1. IC CD4047
  2. Resistors (1K, 18K, 100Ω- 0.5W x 2)
  3. Capacitor (0.22µF)
  4. 12V rechargeable battery
  5. Battery charger circuit(Published before)
  6. IRFZ44 MOSFET x 2
  7. Step Down Transformer (230V primary 12V-0-12V, 5A secondary) (110V to 12V-0-12V, 5A can also be used) NB:- Transformer connection inverted 

Working of DC to AC Inverter

  • You must use a battery and battery charger to implement this inverter circuit. Battery charging circuit is described in our previous post.
  • The inverter circuit is built around IC CD4047 which is wired as astable multivibrator.
  • The operating frequency of astable multivibrator is set to 50Hz.
  • The power MOSFETs IRFZ44 are directly driven by the Q and Q’ output of CD4047.
  • The power MOSFETs are connected in Push Pull configuration (Power amplifier). The MOSFETs will switch according to the pulse from CD4047 astable multivibrator. 
    •  
    •  
  • Thus an AC voltage is transferred to the primary of transformer; it is stepped up to 230V.
  • The transformer used here is an ordinary step down transformer which is connected in inverted manner. That is, the primary of a 230V to 12V-0-12V step down transformer can be treated as secondary for this inverter project.
  • If you would like to get 110V AC, choose 110V to 12V-0-12V step down transformer in reversed way. (That is primary as secondary and secondary as primary)
  • The inverter output is filtered by capacitor C2.
  • Use suitable heat sinks for MOSFETs. 
To get the videos on this contact us its official please
Previous
Next Post »

1 comments:

Click here for comments
Anonymous
admin
Saturday, 11 October 2014 at 14:04:00 GMT+1 ×

I savor, result in I discovered just what I used to be having a look for.
You have ended my four day long hunt! God Bless you man.
Have a great day. Bye

My blog - Deittisivusto Tinder

Congrats bro Anonymous you got PERTAMAX...! hehehehe...
Reply
avatar
3IG